2nd Gen Tacoma Accessory Dash Mount 05-15
Print Profile(1)
Description
This is a 3D printable accessory mounting plate designed for the 2nd Gen Toyota Tacoma. It mounts just above the factory A/C controls and gives you a clean, functional place to mount small accessories without drilling random holes throughout the dash.
The main mounting surface is designed to accept 1/4-20 heat-set inserts, making it compatible with many RAM-style ball mounts, phone mounts, GPS mounts, radio mounts, and other common accessory setups. The mount also includes accessory clip locations that can be used for small gear like a flashlight, pocket knife, radio mic, small tool, or other lightweight items you want within easy reach.
This was designed as a practical interior utility mount for Tacoma owners who want better organization and more mounting options while keeping the install simple and clean.
Features
- Designed for 2nd Gen Toyota Tacoma
- Mounts above the factory A/C controls
- Uses #8 screws for installation
- Accepts 1/4-20 heat-set inserts
- Compatible with many RAM-style mounts and 1/4-20 accessory mounts
- Includes clip-on accessory locations for small gear
- Useful for phones, GPS units, radios, flashlights, knives, or other lightweight accessories
- Printable DIY design for custom interior setups
Recommended Hardware
- 1/4-20 heat-set inserts
- #8 mounting screws
- RAM ball mount or other 1/4-20 compatible accessory hardware
Print Notes
This part is intended for use inside a vehicle, so material choice matters. Do not print this in PLA or PETG for long-term use. Vehicle interiors can get hot enough to soften, warp, or creep lower-temperature materials, especially with a mount or accessory attached.
Recommended materials:
- ASA
- ABS
- PA6-CF / PA6-GF
- PAHT-CF
- PC
- Other high-temperature engineering filaments
For most users, ASA or ABS is a good choice. For a stronger premium version, a carbon-fiber or glass-fiber nylon would be ideal.
Installation Notes
Install using #8 screws in the mounting locations above the A/C controls. Heat-set inserts should be installed carefully so the RAM mount or accessory hardware sits flush and tight. Make sure all mounted accessories are secure before driving.
Disclaimer
This is a DIY printed accessory part. Fitment may vary slightly depending on printer calibration, material, hardware, and truck condition. Do not mount heavy items or anything that could interfere with safe driving, airbags, shifter movement, visibility, or vehicle controls.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (2)