Oversized 3D Meowth Pokemon Card
Print Profile(1)
Description
Print at 100% infill up to a height of 2.6mm, with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 143.48x200mm in size
You may print at higher layer heights below the Base Thickness of 0.6mm
The Max allowed Thickness is 2.6mm and the Actual Thickness is 2.6mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 7 unique filaments.
Swap Instructions:
Start with Black
At layer #13 (1.16mm) swap to Red
At layer #19 (1.64mm) swap to Cyan
At layer #23 (1.96mm) swap to Yellow
AMS completes the 3d Model.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)