P1S TOP GLASS RISER WITH VENT
Print Profile(1)
Description
P1S TOP GLASS RISER WITH VENT
I present another improvement for the P1S printer.
During the design process, I was guided by the following guidelines:
- raised top cover to prevent the PTFE tube from rubbing against it
- ability to print PLA with the door closed
- shape adapted to the printer body
- SD card access
When printing PLA with the door open, the chamber temperature increased from 24°C to 32°C. With the door closed and the vent open, the temperature reached 37°C. A 5-degree temperature increase did not affect print quality, but noise decreased significantly.
To avoid risk of deformation due to temperature, I printed the riser from PETG.
Assembly is so simple that drawings are sufficient without any description.
Boost Me (for free)
If you want to appreciate my work, you can give me a Boost, for which I will be very grateful. :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)