Yitao SHT45 Temperature and Humidity Meter 60° Angled Stand
Print Profile(2)
Description
Desktop/wall mount stand designed specifically by me for the Yitao SHT45 Digital Temperature and Humidity Sensor Module enclosure. Thermometer enclosure link:
Yitao SHT45 thermometer magnetic enclosure (multi-directional ventilation | no support | magnetic)
There is a magnet hole on the back, it is better to install a magnet with a diameter of 4mm and a thickness of 1.5mm. If not, a 2mm thick one is also acceptable. It uses an interference fit so no glue is needed, just press it in with a hard object. This way, the thermometer will be magnetically attracted when inserted, preventing it from falling off.
After installing the magnet, it can also be mounted in reverse when in use, adhered under a monitor or other object, with the angle facing upwards. The ventilation holes on the side of the stand and on the thermometer remain open. There are various placement options, there will always be one that suits you, so download and print it now. If you have any questions, feel free to leave a comment.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)