Call of Cthulhu: Male Investigator Miniature Pack

Call of Cthulhu: Male Investigator Miniature Pack #1

Prepare your investigators for the cosmic horrors that lurk in the dark!

Whether you are playing Call of Cthulhu, Private Eye, Delta Green, or any other classic 1920s–1940s tabletop RPG, this high-quality miniature pack provides the perfect player characters or NPCs for your next gaming session.

Every miniature is designed with a distinct personality, capturing the classic noir and pulp-adventure atmosphere.

This set contains 4 unique male investigators, averaging around 37mm/40mm in height (perfectly scaled for standard tabletop grids):

1. The Adventurer: Armed with grit, a backpack, and ready to explore ancient ruins or dark alleyways.
2. The Scientist / Scholar: Holding his research, prepared to read ancient mythos tomes (and try not to lose his sanity).
3. The Wealthy Gentleman: An elegant, rich benefactor with a cane, financing the expedition into the unknown.
4. The Private Detective: The classic noir investigator with his hands in his pockets and a fedora, tracking down clues.

All models come in two versions—with a base for immediate play, or without a base so you can mount them on your own custom tabletop bases!

The figure measures 37 mm without the base (40mm with the base).

Check out Call of Cthulhu: Female Investigator Miniature Pack #1:

Please read before printing:

This model features fine details and delicate structures.
Make sure your print bed is clean and free from dust, grease, or residue to ensure strong adhesion.
Place your printer on a stable, vibration-free surface, and confirm that vibration compensation is correctly calibrated.
Before printing, double-check that your filament profile matches the material and that your bed temperature is properly set.
For more tips on this topic, check out this video on YouTube. video (Youtube).

Print Recommendation:

I recommend printing this Models with the orignal intendet Print Profil: [original] variable layers, optimised settings.
This includes a layer height of 0.12 mm with a variable layer height to 0.08 mm. The variable layer height is already set in the 3MF file.

I recommend PLA Matte Asche Grey or Bonewhite and the settings in my print profil for a high quality print.

Support Structures:

Be careful when removing the support structures to avoid breaking: Do not cut the support structures with pliers or scissors. The pressure from the scissors pushes the support layers up and down, potentially splitting the figure at a weak point. Instead, pull the support structures away to the side. Ideally, break them off piece by piece to relieve pressure on the figure.

Additional supports have been added to minimalize the risk of print errors.

Brim is enabled in the 3MF file for increased print stability.

The Design and my Print Profil is designed with minimal but necessary supports.

Check out my other Models!

Have fun printing!