vespadrift

cover

IMG_6105.JPEG

IMG_6103.JPEG

plate_1.png

a18d5718022587bb.png

0.2mm layer, 4 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Se ti piace il modello, dammi un boost! Grazie</boostcontent></boostme><p>Vuoi liberare spazio in cucina senza rinunciare a un look pulito e moderno? Questo supporto reggi tazze da sottoripiano è pensato per organizzare fino a 4 tazze in modo pratico, semplice ed elegante.</p><p>Si installa facilmente sotto una mensola o un mobile e permette di sfruttare uno spazio che normalmente rimarrebbe inutilizzato. Perfetto per cucine compatte, coffee corner o setup minimal.</p><h2>🔹 Caratteristiche</h2><ul><li>Capacità: fino a 4 tazze</li><li>Lunghezza totale: 27 cm</li><li>Compatibile con ripiani fino a 20 mm di spessore</li><li>Montaggio con 2 viti oppure adesivo 3M</li><li>Nessun supporto necessario</li><li>Facile e veloce da stampare</li><li>Design minimale e pulito</li></ul><h2>🖨️ Impostazioni consigliate</h2><ul><li>Layer height: 0.20 mm</li><li>Materiale consigliato: PETG</li><li>Compatibile anche con PLA</li><li>Tempo di stampa: circa 1 ora</li></ul><p>Il modello è stato progettato per essere semplice da stampare e immediatamente utile nella vita quotidiana. Un piccolo upgrade per la cucina… con grande soddisfazione da maker. 😄</p><p>Se lo stampi, condividi una foto del tuo setup: sono curioso di vedere le vostre coffee station! ☕🔥</p><p>#3DPrinting #MakerWorld #KitchenOrganizer #MugHolder #CoffeeStation #NoSupports #FunctionalPrint #PETG #PLA #HomeOrganization #KitchenHack #3DPrinted</p>

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like the model, give me a boost! Thank you</boostcontent></boostme><p>Do you want to free up kitchen space without sacrificing a clean and modern look? This under-shelf mug holder is designed to organize up to 4 mugs in a practical, simple, and elegant way.</p><p>It easily installs under a shelf or cabinet and allows you to utilize space that would normally remain unused. Perfect for compact kitchens, coffee corners, or minimalist setups.</p><h2>🔹 Features</h2><ul><li>Capacity: up to 4 mugs</li><li>Total length: 27 cm</li><li>Compatible with shelves up to 20 mm thick</li><li>Mounting with 2 screws or 3M adhesive</li><li>No supports needed</li><li>Easy and quick to print</li><li>Minimal and clean design</li></ul><h2>🖨️ Recommended settings</h2><ul><li>Layer height: 0.20 mm</li><li>Recommended material: PETG</li><li>Also compatible with PLA</li><li>Print time: approximately 1 hour</li></ul><p>The model was designed to be easy to print and immediately useful in daily life. A small upgrade for the kitchen... with great satisfaction for makers. 😄</p><p>If you print it, share a photo of your setup: I'm curious to see your coffee stations! ☕🔥</p><p>#3DPrinting #MakerWorld #KitchenOrganizer #MugHolder #CoffeeStation #NoSupports #FunctionalPrint #PETG #PLA #HomeOrganization #KitchenHack #3DPrinted</p>

Print Profile(1)

Bill of Materials

Description

🔹 Features

🖨️ Recommended settings

Comment & Rating (0)

License

Related Models

Under Shelf Mug Holder