Shoulder Stock - MP40 - Machine Pistol 40 (1:1)

!!! IMPORTANT !!!

!!! This is only the shoulder stock for the specified toy model !!!

Please ensure that you comply with local and international laws and do not use the model for inappropriate purposes 
This is a cosplay prop that can be hung on the wall. Due to new regulations, I cannot provide the complete model 

here 

Only the " shoulder stock " is offered.
The complete model is shared on a cloud drive.

After downloading the .3mf file in Bambu Studio ("ONLY IN BAMBU STUDIO") 

you will receive the password on an extra build plate " 

in the opened file, the square part needs to be turned over.

-------- Download the program “WinRAR” 

then after installation, right-click on the downloaded file and choose Extract 

then the password prompt will appear! --------

 Click here 

to download the additional assemblies.

Information for wall mount:

https://makerworld.com/de/models/2835616-mg34-mg42-stg44-mp40-wall-mount#profileId-3160372

This model can be mounted with M4 machine screws, which would be a maximum length of 16mm,
or you can use my rivets that I have added to each component,

I then glued these in, as I do not intend to disassemble it again.

I also replaced the springs with springs that can be printed yourself.
Everyone can decide for themselves, of course it's better with metal compression springs, but for hanging on the wall, it's sufficient.

I also tried to fit every large component onto a build plate with all the small parts that belong to it.

The original folding shoulder stock is designed by me to be fixed. (not movable like the original)

All parts that are red on the build plates are alternative options.