Adjustable Wall Mount for Bambu Lab AMS lite

Maximize your desk space and improve your printer's efficiency with this articulated and swiveling wall mount for AMS lite!

Unlike fixed mounts, this intelligent design utilizes a shaft-hole (pin) coupling that allows the entire AMS lite unit to freely rotate and follow the printhead's movements. This feature minimizes bends and friction in the PTFE tubes, ensuring smooth, consistent, and effortless filament feeding for the extruder.

Design Features:

• 3-Part Structure: Composed of a fixed plate to be securely anchored to the wall (using countersunk screws) and a movable two-part arm that attaches to the back of the AMS lite.
• Smooth Movement: The pin coupling perfectly distributes the geometric load of 4 full spools, offering smooth rotation without flexing.
• Total Ergonomics: Allows you to position the AMS lite above or next to the printer, completely freeing up your workspace.

Print Settings:

Since the support must bear the weight of the AMS lite and 4 spools (approximately 5-6 kg in total under dynamic stress), structural strength is essential:

• Recommended Material: PETG, ABS or ASA (I used PETG, it's been there since July 2025) to ensure maximum toughness and durability over time under constant load. PLA can only be used if printed with very robust parameters (e.g., PLA Tough).
• Orientation: Print the parts by placing them on the widest flat side to optimize the fiber (layer) orientation relative to the shear forces on the pin.
• Walls (Wall Loops): At least 4 (essential for the solidity of the holes and the pin).
• Infill: 20% -40% (Gyroid or Linear) for failure-proof structural density.