SnapBook – Pocket Fidget Box
Print Profile(1)
Bill of Materials
Description
This looks like a tiny book.
But once you open it…
you’ll probably do it again.
And again.
It’s built from two simple parts —
a loose outer cover and an inner box.
Individually, they don’t feel like much.
But together, it creates a clean snap-close effect.
No latch.
No magnets.
Just structure.
Small enough to clip onto your keys,
simple enough to print,
and surprisingly satisfying to play with.
The cover text is fully editable,
so you can turn it into whatever you want.
🔧 Assembly
Minimal assembly required.
- Remove supports from the inner box
- Glue the cover to the inner box ( make sure the orientation is correct )
Make sure the opening direction is aligned before gluing.
That’s it — ready to snap.
🖨️ Print Notes
Cover
- 0.12 layer height for better text clarity
- Embedded text (0.2mm depth) for cleaner results
- Painted brim ears for easier removal
Inner Box
- 0.12 layer height
- Supports enabled
- Support interface: 4 layers
- Z top distance: 0.25
- Bridge flow: 1.5
Boost Me (for free)
👍 If you enjoy the design,
consider giving it a Boost — it really helps!
Membership
💼 If you’d like to sell physical prints of this model, you can support me through the commercial license membership — link in profile. It’s basically the price of a coffee ☕
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (33)