Storage Compartment DIN Rail
Print Profile(1)
Bill of Materials
Description
Storage Compartment DIN Rail
These are simple storage compartments in various sizes for hanging on a DIN rail or similar…
The compartments are 211, 100, 75, and 50mm wide and 82mm deep.
If the depth does not fit, feel free to send me a message and I will add another print profile as an *.stl.
Disclaimer:
* - some external links contain affiliate data. If you order something through these links, I will receive a small commission to supplement my pension, it will cost you nothing extra.
Thank you very much.
Please note: The quality of the print has a lot to do with very well-dried filament and a very clean print plate. Please check your printing environment and adjust the print bed and nozzle temperature to your filament.
The models shown here are without exception printed with Bambu Lab P1S.
*Filament dryer: https://www.kleinanzeigen.de/s-anzeige/3-fach-filamenttrockner-doerrautomat-neu/3450232254-249-20831
*Container for storing filament spools: https://amzn.to/4eyK6sQ - the filament spools fit in there perfectly
*Silica - granules - https://amzn.to/4fxnWbx - I take 40g per container (4L), if the granules have become dark due to humidity, they are dried in the oven at approx. 70 degrees, they turn orange again and can be reused
*Bambu Lab P1S 3D Printer: https://eu.store.bambulab.com/products/p1s?from=navigation
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)