New York Knicks Spinner Rally Chain
Print Profile(1)
Bill of Materials
- Super Glue x 1: Makes the things stick
- 608 Bearing x 1: Makes the basketball spin
Description
New York Knicks Spinning Rally Chain
Cheer on the New York Knicks with this spinning rally chain!
Boost Me (for free)
Looking for more teams? Send me a boost and let me know which team you want next!
Building Your Chain
Once everything has been printed, follow the steps below to put your rally chain together.
- Glue the Middle Post to the Base
- Glue the Logo Posts to the Logo
- Put a 608 Bearing into the middle of the baseball
- Note: The bearing hole will be a tight fit, but I promise it fits. I typically put the bearing part way in then use my palm and weight to push it all the way in. It should be flush with the spinner
- Glue the single Logo Post to the Base
- Once everything has dried, put the baseball on the Middle Post
- Glue the bottoms of the Logo Posts and put the Logo and Logo Posts on top.
- Note: You should hear a click when everything is in place. I will typically place a 5 pound weight on it for a bit to make sure it sets correctly.
- Once everything has dried again, print some links and get to spinning!
Looking for Rally Chain links? Click on the link below!
https://makerworld.com/en/models/1693677-chain-links-for-rally-chains#profileId-1795571
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)