Lily Flower Wall Art panels

If you want to see other sets of paintings similar to this, visit my profile.

Please read the instructions before printing

Item description:

This is a set of triptych wall decorations, characterized by a refined minimalist botanical design with lily motifs (Lily) and clean geometric lines.

The three panels placed side by side create a unique continuous floral composition, ideal for enhancing walls in living rooms, bedrooms or hallways with a modern and contemporary taste.

I placed holes at the top and bottom so they can be hung precisely with small nails.

Print instructions:

Printed in Bambulab Black PLA.

Printing is very easy and only consumes 56 grams of filament in total (1.60 millimeters thick).

Colors can be changed from the slicer during printing, the model can be enlarged or reduced as desired. Usually, 1.60 mm thickness is more than sufficient. So if you enlarge it on the x and y axes keep the “Uniform scale” function active, then to vary the thickness, uncheck “Uniform scale” and only act on the value of the z-axis which you will set to the desired millimeters (I set 1.60 mm and it works perfectly).

GENERAL TIPS

A tip I always give is to first clean the print bed with dish soap and a sponge rinsing with hot water, then dry it with compressed air avoiding touching the surface with your hands. I also recommend performing the dynamic flow rate and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. It is these small precautions, along with many others, that determine the success of a good print.

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to experience problems do not hesitate to contact me, let's find solutions together in a perfect collaborative atmosphere. I have made several prints of this object and they all turned out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, damp or poor quality filaments, do not blame me.

PRINT INSTRUCTIONS:

• Layer height 0.2 mm

• Initial layer height 0.2 mm

• Seam position aligned

• Wall loops 2

• Top shell layers 5

• Bottom shell layers 3

• NO supports

• Infill 15 %

• Infill pattern Grid

• Outer wall speed 200 mm/s

• Inner wall speed 300 mm/s

• Normal print acceleration speed 10,000 mm/s

• Outer wall acceleration speed 10,000 mm/s