Organza Embroidery Style Ocean Bookmark | Print in Place, No Assembly Required (Organza Embroidery Bookmark)

Combining the popular organza embroidery texture, it extracts the natural streamlined forms of nautilus and long conch. Through the unique layering of 3D printing, the base exhibits a light and translucent fabric-like visual effect, while the three-dimensional framework on the surface perfectly restores the slightly convex tactile feel of traditional hand embroidery. No multi-color printer (AMS) required, single print, Print in Place. Remove from the build plate, and instantly experience the ocean's rhythm at your fingertips.

Printing Recommendations and Slicing Parameters (Must Read) 

The key to this model's success lies in the strong contrast between the 'transparency of the base layer' and the 'three-dimensional feel of the surface layer'. It is recommended to directly refer to the following Bambu Studio parameters:

• Base Layer Thickness Control: The base is very thin. To achieve the translucent effect of organza, the base layer must be strictly controlled to 1 to 2 layers (0.2mm for the first layer is sufficient).
• Surface Layer Height: For the upper embroidery texture, it is recommended to use a fine layer height of 0.08mm - 0.12mm to eliminate stair-stepping and make lines smoother.
• First Layer Speed: Please reduce the first layer speed to below 30mm/s. Fine edge contours require sufficient cooling and adhesion time.

Material Recommendation 

To replicate the cool, icy translucent feel shown in the pictures, high-transparency PETG or translucent/silk PLA is the first choice. The color used in the image is a low-saturation, clear blue. It is strongly recommended to avoid using opaque or matte filament, as this would lose the 'soul' of 'organza'.

User Experience 

Extremely thin and light, it feels like nothing when clipped between book pages and will not damage the book's spine binding. Not just a bookmark, it also has a great texture as a planner decoration or handmade souvenir.