Self-watering planter with Alocasia leaf

# 🌿 Alocasia Jacklyn Self-Watering Pot Set – S, M, L & XL

This set was specifically designed so that the pots **do not need to be scaled**.

Anyone who has ever scaled decorative plant pots with elaborate leaf motifs knows the problem: wall thicknesses change, details become unclean, and the design loses its effect. That's why you get four separately adjusted sizes here, each specifically optimized for its size.

Each pot features a plastically crafted **Alocasia Jacklyn leaf** which stands out particularly well with single-color prints and gives the pots their characteristic look.

---

# 💧 Self-Watering System

All sizes are designed for use as self-watering pots.

The actual plant pot sits in the upper section. Below it is a separate water reservoir.

A capillary wick, guided through the bottom openings of the orchid or aroid pot, allows the plant to independently absorb water from the reservoir. This ensures a consistent water supply and significantly extends watering intervals.

For all sizes, care has been taken to ensure that the inner pots can be easily removed from the top without having to fumble inside the pot.

---

# 👀 Viewing Window (optional)

On the back, there is a viewing window through which the water level and root development can be conveniently checked without having to remove the inner pot.

The viewing window is designed as an optional negative and can be activated or deactivated in Bambu Studio as needed.

### With Viewing Window

✅ Water level control

✅ Root development control

✅ Ideal for orchids, alocasias, and other aroid plants

### Without Viewing Window

✅ Closed outer wall

✅ Use as decoration

✅ Use as a vase

✅ Use as a pen holder

✅ Use as a general storage container

---

# 📏 Sizes

## Size S

* Suitable for a clear orchid pot with a **6 cm diameter**

* Water reservoir: **100 ml plastic cup**

* Capillary wick can be easily guided through the orchid pot

* Easy insertion and removal of the inner pot

---

## Size M

* Suitable for a clear orchid pot with a **7.6 cm diameter**

* Water reservoir: **200 ml plastic cup**

* Capillary wick can be easily guided through the orchid pot

* Easy insertion and removal of the inner pot

---

## Size L

* Suitable for a clear orchid pot with a **9 cm diameter**

* Water reservoir: **400 ml plastic cup**

* Capillary wick can be easily guided through the orchid pot

* Ideal for larger plants with higher water requirements

---

## Size XL

* Suitable for a **10 cm aroid pot**

* The aroid pot is deeper and intentionally extends slightly beyond the upper edge

* This makes removing the inner pot particularly convenient

* Water reservoir: **500 ml plastic cup**

* Capillary wick can be easily guided through the aroid pot

---

# ⚠️ Important Note

The print files contain only the decorative outer pots.

The following components are **not included in the STL files**:

* Orchid pots

* Aroid pots

* Plastic cups for the water reservoirs

* Capillary wick

These components must be procured separately.

The required orchid pots, aroid pots, plastic cups, and capillary wicks are readily available from the big A.

The outer pots serve as a decorative cover, transforming simple planters into an aesthetically pleasing self-watering system.

---

# 🖨️ Printing Instructions

* No scaling required

* Each size has been adjusted separately

* Optimized wall thicknesses for each size

* Optimized leaf details for each size

* Suitable for PLA, PLA+, PETG, and comparable materials

* A fine layer height is recommended for optimal results

# 📜 License

These files are intended exclusively for personal use.

Not permitted:

❌ Sale of digital files

❌ Distribution of digital files

❌ Distribution of files on other platforms

❌ Sale of printed copies

❌ Commercial use of any kind

By downloading, you agree to these terms.

# 📜 License

A commercial license can be acquired via Makerworld through a commercial membership

# 📜 License

---

# ❤️ Support

If you like my models, I would be very happy about a like, a make, or a photo of your print.

It's especially nice to see which plants have found a new home in the pots.

If you share your prints on social media, I would be thrilled if you tag me:

📸 **Instagram: @marbledjungle**

🎵 **TikTok: @marbledjungle**

Thank you for your support and happy printing! 🌿