University of Texas Bevo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200.15x200.15mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #d22332 PLA+ Sunlu Red  Transmission Distance: 6
    #ff7713 PLA+ Sunlu Sunny Orange  Transmission Distance: 8
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #10 (0.88mm) swap to Sunny Orange
    At layer #16 (1.36mm) swap to Sunflower Yellow
    At layer #21 (1.76mm) swap to Jade White for the rest.