Patriot Mask

⚠️ WARNING!!! ⚠️

Citizens of Freedom,

Before you embark upon this glorious mission, you should know one important fact:

This model was created by a complete amateur who does not possess a full understanding of the ancient and mysterious art of color-splitting.

The designer stared into the abyss of CAD software, saluted, and did his absolute best.

As a result, the fully colored version of the mask is included for those brave enough to attempt the ultimate printing challenge.

But be warned...

With three colors, an AMS, and enough filament changes to make your printer question its purpose in life, the amount of purge waste and print time will be beyond anything you have previously witnessed.

Your printer may grow old.

Your AMS may test your faith.

Your filament reserves may be depleted.

Yet if your trust in your machine is as absolute as your patriotism, and your dedication to freedom is unwavering, you shall be rewarded with the finest version of this mask.

FOR THOSE WITHOUT AN AMS

Fear not, citizen.

Most parts have been separated by color to make assembly easier. The primary exception is the blue section containing the stars.

Should your equipment lack the ability to print multiple colors, you may simply print this section in blue and manually color the stars afterward.

However, be advised:

The path of the non-AMS patriot is not an easy one.

Printing the mask in separate pieces will require both super glue and superhuman patience.

Alignment, assembly, sanding, gluing, and cleanup may test your resolve far more than the printing itself.

Many have started this journey.

Only the most dedicated have finished it.

If you possess enough adhesive, determination, and questionable levels of confidence, victory shall be yours.

INCLUDED FILES

• Full assembled model
• AMS-ready version
• Color-separated parts
• Individual printable components

COMMERCIAL LICENSE

You are NOT permitted to sell physical prints of this model unless you obtain a commercial license through the following link:

https://www.etsy.com/listing/4517231961/patriot-mask-stl-file-3d-printable

Unauthorized manufacturing of patriotic face coverings may result in strongly worded disappointment.

FINAL WORDS

This mask is not for the faint of heart.

It is for the brave.

The determined.

The citizens willing to sacrifice filament, sleep, and possibly their sanity in pursuit of freedom.

Load your filament.

Trust your printer.

Trust the process.

And remember:

Democracy isn't going to print itself.

🦅

Good luck, citizen.