Self-watering planter Alocasia Sedenii

# 🌿 Alocasia Sedenii Self-Watering Pot Set – S, M, L & XL

This set was specially designed so that the pots **do not need to be scaled**

Anyone who has ever scaled decorative plant pots with elaborate leaf motifs knows the problem: wall thicknesses change, details become messy, and the design loses its impact. That's why you get four separately adapted sizes here, each optimized specifically for its size

Each pot features a sculpturally detailed **Alocasia Sedenii leaf**, which stands out beautifully, especially with single-color prints, giving the pots their characteristic look

---

# 💧 Self-Watering System

All sizes were designed for use as self-watering pots

The actual plant pot sits in the upper section. Below it is a separate water reservoir

A capillary wick, threaded through the bottom openings of the orchid or aroid pot, allows the plant to independently draw water from the reservoir. This ensures a consistent water supply and significantly extends watering intervals

For all sizes, care has been taken to ensure that the inner pots can be easily removed from above without having to manipulate them inside the pot

---

# 👀 Viewing Window (optional)

On the back, there is a viewing window through which the water level and root development can be easily monitored without having to remove the inner pot

The viewing window is designed as an optional negative and can be activated or deactivated in Bambu Studio as needed

### With Viewing Window

✅ Water level control

✅ Root development control

✅ Ideal for orchids, alocasias, and other aroid plants

### Without Viewing Window

✅ Closed outer wall

✅ Use as decoration

✅ Use as a vase

✅ Use as a pen holder

✅ Use as a general storage container

---

# 📏 Sizes

## Size S

* Suitable for a clear orchid pot with **6 cm diameter**

* Water reservoir: **100 ml plastic cup**

* Capillary wick can be easily threaded through the orchid pot

* Easy insertion and removal of the inner pot

---

## Size M

* Suitable for a clear orchid pot with **7.6 cm diameter**

* Water reservoir: **200 ml plastic cup**

* Capillary wick can be easily threaded through the orchid pot

* Easy insertion and removal of the inner pot

---

## Size L

* Suitable for a clear orchid pot with **9 cm diameter**

* Water reservoir: **400 ml plastic cup**

* Ideal for larger plants with higher water requirements

---

## Size XL

* Suitable for a **10 cm aroid pot**

* The aroid pot is deeper and intentionally extends slightly beyond the upper edge

* This makes removing the inner pot particularly convenient

* Water reservoir: **500 ml plastic cup**

* Capillary wick can be easily threaded through the aroid pot

---

# ⚠️ Important Note

The print files contain only the decorative outer pots

The following components are **not part of the STL files**:

* Orchid pots

* Aroid pots

* Plastic cups for water reservoirs

* Capillary wick

These components must be procured separately

The necessary orchid pots, aroid pots, plastic cups, and capillary wicks are readily available at the big A

The outer pots serve as a decorative shell and transform simple planters into a visually appealing self-watering system

---

# 🖨️ Print Instructions

* No scaling required

* Each size was adjusted separately

* Optimized wall thicknesses for each size

* Optimized leaf details for each size

* Suitable for PLA, PLA+, PETG, and comparable materials

* A fine layer height is recommended for optimal results

---

# 📜 License

These files are intended exclusively for private use

Not permitted are:

❌ Sale of digital files

❌ Distribution of digital files

❌ Dissemination of files on other platforms

❌ Sale of printed copies

❌ Commercial use of any kind

By downloading, you agree to these terms

# 📜 License

A commercial license can be acquired via Makerworld as part of a commercial membership

# 📜 License

---

# ❤️ Support

If you like my models, I would be very happy about a like, a make, or a photo of your print

It's especially nice to see which plants have found a new home in the pots

If you share your prints on social media, I would be thrilled about a link:

📸 **Instagram: @marbledjungle**

🎵 **TikTok: @marbledjungle**

Thank you very much for your support and happy printing! 🌿