skelone

cover

20260606_191514.jpg

20260606_191813.jpg

20260606_191521.jpg

20260606_201510.jpg

plate_1.png

4a597babf6931ed0.jpg

0.08mm layer, 2 walls, 100% infill

<boostme><boosttitle>Boost Me</boosttitle></boostme><h2>HueForge | Sticker #FGHTNZS Dino</h2><h4>Bitte lasst ein Like und eine Bewertung da, wenn Euch das Modell gefällt</h4><p>Ihr benötigt zusätzlich noch doppelseitiges Klebeband, wenn Ihr diesen Sticker aufkleben möchtet.</p><p>&nbsp;</p><p>&nbsp;</p><p>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</p><p>&nbsp;</p><p>Swap Instructions:<br>    Start with Black<br>    At layer #9 (0.8mm) swap to Red<br>    At layer #11 (0.96mm) swap to White for the rest</p><p>&nbsp;</p>

<boostme><boosttitle>Boost Me</boosttitle></boostme><h2>HueForge | Sticker #FGHTNZS Dino</h2><h4>Please leave a like and a rating if you like the model</h4><p>You will also need double-sided tape if you want to attach this sticker</p><p>&nbsp;</p><p>&nbsp;</p><p>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</p><p>&nbsp;</p><p>Swap Instructions:<br>    Start with Black<br>    At layer #9 (0.8mm) swap to Red<br>    At layer #11 (0.96mm) swap to White for the rest</p><p>&nbsp;</p>

HueForge | Sticker #FGHTNZS Dino

ASIA

Print Profile(1)

Description

HueForge | Sticker #FGHTNZS Dino

Please leave a like and a rating if you like the model

Comment & Rating (0)

License

Related Models