Dava

cover

PXL_20260526_125231352.jpg

PXL_20260526_125259922.jpg

rozmer.png

left.png

down.png

right.png

plate_1.png

be143227663678b6.jpg

0.2mm layer, 3 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3><strong>CZ | Držák pro bezpečnostní kamery Hikvision</strong></h3><p>Praktický a odolný držák na zeď pro bezpečnostní kamery Hikvision (AcuSense / ColorVu). Design byl navržen pro maximální pevnost v exteriéru a čistý vzhled bez viditelných kabelů.</p><h4><strong>Důležité informace pro montáž:</strong></h4><ul><li>Pro bezpečné uchycení kamery k držáku je potřeba použít <strong>3× závitové vložky M3</strong> (heat-set inserts), které se za tepla nalisují (zataví páječkou) do předpřipravených otvorů.</li></ul><h4><strong>Dostupné varianty (v tiskovém profilu):</strong></h4><p>Model obsahuje celkem <strong>4 různé verze</strong> podle toho, kudy potřebujete vést kabeláž:</p><ol><li><strong>Zadní vývod:</strong> Ideální, pokud kabel vede přímo skrz zeď za držákem.</li><li><strong>Výřez DOLE:</strong> Pro kabel vedený po zdi směrem dolů.</li><li><strong>Výřez VPRAVO:</strong> Pro kabel vedený po zdi doprava.</li><li><strong>Výřez VLEVO:</strong> Pro kabel vedený po zdi doleva.</li></ol><h4><strong>Doporučené nastavení tisku:</strong></h4><ul><li><p><strong>Materiál:</strong> Jednoznačně doporučuji <strong>PETG</strong>, <strong>ASA</strong> nebo <strong>ABS</strong>. PLA není vhodné kvůli UV záření a povětrnostním vlivům.</p><p>&nbsp;</p></li></ul><h3><strong>EN | Hikvision Security Camera Wall Mount Bracket</strong></h3><p>A practical and durable wall mount bracket designed for Hikvision security cameras (AcuSense / ColorVu series). Engineered for maximum outdoor durability and a clean look.</p><h4><strong>Assembly Requirements:</strong></h4><ul><li>To secure the camera to the mount, you will need <strong>3× M3 Threaded Heat-Set Inserts</strong>. These should be melted into the pre-drilled holes using a soldering iron.</li></ul><h4><strong>Available Variants (Included in the profiles):</strong></h4><p>The model features <strong>4 different versions</strong> based on your cable routing needs:</p><ol><li><strong>Rear Outlet:</strong> Perfect if the cable goes directly through the wall behind the mount.</li><li><strong>Bottom Cutout:</strong> For cables routed downwards along the wall.</li><li><strong>Right Cutout:</strong> For cables routed to the right.</li><li><strong>Left Cutout:</strong> For cables routed to the left.</li></ol><h4><strong>Recommended Print Settings:</strong></h4><ul><li><p><strong>Filament:</strong> Highly recommended to use <strong>PETG</strong>, <strong>ASA</strong>, or <strong>ABS</strong> for UV and weather resistance. Do not use PLA for outdoor applications.</p><p>&nbsp;</p><p>&nbsp;</p></li></ul><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thanks</boostcontent></boostme><p>&nbsp;</p>

<h3><strong>EN | Hikvision Security Camera Wall Mount Bracket</strong></h3><p>A practical and durable wall mount bracket designed for Hikvision security cameras (AcuSense / ColorVu series). Engineered for maximum outdoor durability and a clean look.</p><h4><strong>Assembly Requirements:</strong></h4><ul><li>To secure the camera to the mount, you will need <strong>3× M3 Threaded Heat-Set Inserts</strong>. These should be melted into the pre-drilled holes using a soldering iron.</li></ul><h4><strong>Available Variants (Included in the profiles):</strong></h4><p>The model features <strong>4 different versions</strong> based on your cable routing needs:</p><ol><li><strong>Rear Outlet:</strong> Perfect if the cable goes directly through the wall behind the mount.</li><li><strong>Bottom Cutout:</strong> For cables routed downwards along the wall.</li><li><strong>Right Cutout:</strong> For cables routed to the right.</li><li><strong>Left Cutout:</strong> For cables routed to the left.</li></ol><h4><strong>Recommended Print Settings:</strong></h4><ul><li><p><strong>Filament:</strong> Highly recommended to use <strong>PETG</strong>, <strong>ASA</strong>, or <strong>ABS</strong> for UV and weather resistance. Do not use PLA for outdoor applications.</p><p>&nbsp;</p><p>&nbsp;</p></li></ul><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thanks</boostcontent></boostme><p>&nbsp;</p>

Hikvision Wall Mount Bracket

ASIA

Print Profile(4)

Bill of Materials

Description

EN | Hikvision Security Camera Wall Mount Bracket

Assembly Requirements:

Available Variants (Included in the profiles):

Recommended Print Settings:

Comment & Rating (0)

License

Related Models