Enraged Divine Beast talisman – Elden Ring

Enraged Divine Beast Talisman – Elden Ring ✨

A high-detail recreation of the Enraged Divine Beast talisman from Elden Ring, designed as a display piece, collectible prop, or wearable talisman.

This model is inspired by the in-game talisman depicting the terrifying divine beast spirit, with its open mouth, horned face, clawed hands, flowing mane, and chaotic swirling hair-like tendrils.

Designed to capture the aggressive face detail, raised horns, open jaw, layered hands, flowing hair forms, circular backing, and ornate talisman shape while still being printable on FDM printers.

🔧 Print Notes

✓ Designed for Bambu CoreXY printers
✓ Tree supports recommended for cleaner results
✓ Print orientation is already set in the included profiles
✓ 0.08mm layer height recommended for best detail
✓ Matte gold, bronze, aged metallic, marble, or gray PLA all work well
✓ Slow outer walls can help preserve the face, horns, teeth, hands, and hair details
✓ Works great as a display piece, cosplay accessory, or collectible prop

🧭 Print Orientation Notes

Two print orientations are included:

Recommended profile: Upright orientation

The upright profile is recommended for the cleanest front-facing detail. Since the model prints more like a vertical relief, the face, horns, hands, open mouth, teeth, and flowing hair should come out cleaner with less visible top-surface stepping.

Optional profile: Flat / laying-down orientation

A flat orientation is also included for users who want a faster and simpler print. This version may show more visible layer stepping on the front details, especially on the curved hair, face, horns, mouth, and tendrils, but it is easier and quicker to print.

My recommendation:
Use the upright profile for the best-looking display print. Use the flat profile if you want a quicker print and do not mind more visible layer lines on the front surface.

🧼 Before Printing

Please clean your build plate before starting the print. A dirty or oily plate can cause lifting, warping, or poor bed adhesion, especially on detailed prints with smaller contact areas or support-heavy areas.

Recommended prep:

✓ Wash the plate with dish soap and warm water, then dry fully
✓ Avoid touching the print surface after cleaning
✓ Use glue stick or liquid glue if your plate normally has adhesion issues
✓ Add a brim if you notice edge lifting or instability
✓ Watch the first layer to make sure it is sticking evenly before walking away

📏 Scaling

Scale up or down depending on your display, cosplay, or wearable needs.

If scaling smaller, some of the finer face, teeth, horn, hand, and hair details may become less visible. For the cleanest result, I recommend keeping the model at the uploaded size or scaling up slightly.

If scaling the model down significantly, check the thin hair/tendril areas before printing to make sure they are still strong enough.

⚠️ A1 / A1 Mini Note

This profile was tuned on CoreXY machines. It should still print on A1 / A1 Mini, but slowing speeds slightly and using a brim can help with stability, especially for the upright profile.

A dedicated A1 / A1 Mini profile may be added later.

🌑 More Elden Ring Prints

If you like this print, check out my other Elden Ring 3D prints below! 

Elden Ring 3D Prints Collection:

I’ll be adding more Elden Ring talismans, weapons, wall displays, cosplay props, Zelda-inspired prints, anime-related models, and collectible display pieces regularly.

If that sounds like your kind of stuff, a follow would help a ton and you’ll see new models as they go live 🙌

If you print this, I’d love to see how it turns out. Feel free to share your results, painted versions, or display setups