Chandelure Pokémon card relief

Chandelure, the fire-ghost Pokemon from gen V, used by the elite four member Shauntal in pokemon BW.

This model is based on the card Chandelure #103, the text corresponds but the artwork is custom.

The small text is not readable with this dimentions, I have not tried scailing up but may you have luck with that if you intend on trying. (also i do not try to fake it is possible with AI unlike some other Pokemon relief card maker on this site).

This model makes a lot of waste if used without a toolchanger/dual nozzle printer (approximately 20g model and 56g total) so if you intend on printing more than one put them all in one plate and most importantly make sure your poop bin can handle that much waste (ask me how i know).

Printing instruction for 3mf users:

You will need 4 colors: white or gray, purple, yellow and black. You can have only 3 and merge yellow with white and the result is not that bad imo, but don't take my word for it, download the model and see it for yourself. supports are easily removed, I printed 3 of these and the arms never broke, but still be careful when pulling away.

Printing instruction if you don't want to use the print profile:

Import the .obj file in bambu studio, if not already set the specified number of colors to 32. This is done because color importing is very inconsistent because bambu studio mixes black and purple for some reason.

The colors I aimed for are white, black, purple and yellow. Technically there is a red point but i usually make it yellow because i can use only 4 colors at a time.

For support i recomment painting them because the default ones are way overkill and are difficult to remove, especially if using the no_supports.obj file. In my print profile I used 15° overhangs but i had to paint supports on the arms.

NOTE: if you want to obtain my exact color results I used gold and ultragalaxy purple filament from prusa and jade white and black pla basic from bambu.

Happy printing!