Functioning Bobber Fishing Buddy

Fishing Bobber with Arms and Legs

Overview
 The ultimate desk companion that doubles as a functional bobber on the water! This Articulated Fishing Bobber with Arms and Legs is the perfect blend of fun and functionality. Designed to be a hilarious conversation piece, it's also fully capable of keeping your bait at the perfect strike depth. Bless your next fishing trip or White Elephant party with a gift nobody will see coming! 

Why You'll Love It:

• Fully Functional: Can be used as a real fishing float when attached to your line.
• Fully Articulated: Features print-in-place legs and poseable legs that add personality on and off the water.
• Conversation Starter: Looks amazing on your tackle box or as a desk buddy when not in use.
• Print-in-Place: Designed for easy printing with
•  no supports required.

⚙️ Printing Instructions & Settings

• Material: [PLA / PETG / ABS]. Note: If you plan to actually use this in the water, PETG or ASA is recommended for UV and water resistance, or you can seal your print with a waterproof clear coat.
• Layer Height: 0.2mm or 0.16mm for higher detail on the joints.
• Infill: 15% - 20% gyroid or grid. You can adjust the infill in the main bobber body to control its buoyancy.
• Supports:  Does not require supports. 
• Bed Adhesion: A brim is highly recommended if you struggle with bed adhesion.

🛠️ Assembly & Rigging

1. Arms and legs: This is designed to be print in place
2. Rigging: To use it as a traditional float, thread your fishing line through the center hole (for slip bobber rigs) or use a standard spring/clip mechanism to attach the line to your buddy's torso

Happy Printing & Tight Lines!
If you enjoy this model, please leave a like, post your makes, and check out my profile for more creative and functional 3D prints!