Spider-Man Guitar Picks 1mm - AMS / No AMS

With trailers for Spider-Man: Brand New Day popping up absolutely everywhere lately, I just couldn't resist bringing some web-slinging action to my guitar setup!

This is a set of classic-shaped guitar picks featuring Spider-Man's iconic face. They are 1mm thick, making them versatile for both rhythm strumming and precise lead playing.

The best part? The raised web design isn't just for show—it provides a fantastic tactile grip, so the pick won't slip out of your fingers even during intense playing sessions.

🛠️ Why PET-G?

I highly recommend printing these in PET-G. It gives the picks the perfect balance of flexibility and high impact resistance, ensuring they don't snap or wear down too quickly against your guitar strings.

🖨️ Recommended Print Settings

This print profile is fully optimized for Bambu Lab AMS for a seamless multi-color print.

• Layer Height: 0.12mm (High Quality)
• Wall Loops: 4
• Infill: 100% 
• AMS Ready: Yes 🎨

No AMS? No Problem! (Manual Color Change Version)

I have also created a dedicated print profile for those printing without an AMS system. You can still easily achieve this multi-color look through manual filament swaps during pre-configured pauses.

How it works:

1. Start printing with Red (the primary base color).
2. At the first pre-set pause, swap the filament to White.
3. At the second pre-set pause, swap the filament to Black.

⚠️ Crucial Note: It is vital that you use the same type of filament for all three colors throughout the entire print. Since I highly recommend printing these in PET-G, you must also use white and black PET-G. Mixing different material types (e.g., starting with PET-G and swapping to PLA) will cause print failure due to poor layer adhesion and different temperature requirements.