Muscle Bust

Hey fellow makers! If you are looking for a massive dose of 80s nostalgia, you’ve come to the right place. This epic diorama brings the legendary heroes of our childhood together in one stunning piece.

It looks absolutely incredible once printed and is designed in a way that keeps the print running smoothly despite all the high-end details.

My Slicing & Printing Recommendations

To make sure your print turns out flawless, here are my tried-and-tested settings:

🧵 Filament Tips

• Marble PLA: My absolute favorite for this model! It instantly gives the entire piece the premium look of a carved stone statue (looks amazing on the photos).
• Matte Gray / Matte Clay: Your best bet if you plan to paint or do some post-processing afterward.

📐 Slicer Settings

• Layer Height: 0.12 mm to 0.16 mm is the sweet spot.
• Infill: 10% to 15% Gyroid is more than enough and saves a good amount of material.
• Walls: Go with at least 3 Wall Loops to ensure all the fine details and overhangs close up cleanly.

Fire up your printers and make sure to upload pictures of your finished makes—I can't wait to see which filaments you choose for this one. If you like the model, feel free to drop a like!