Mario Pen Holder/Desktop Trash Can

【Mario-style Pen Holder/Desktop Trash Can】

Update Log:

• 2026.07.16 Update:Added print profile, if installing the green grass facing up, simply print the second profile, the version with blue stripes facing up 😊
• 2026.06.19 Update: Modified box body printing parameters, aiming to reduce print layer lines on the main body

Looking forward to seeing your printed models!! If you like it, please boost me 😊

The rendering of the four sides is as follows: The final method uses embossing, not over-emphasizing the main body

🎨 Recommended print colors:

1. Yellow: PLA Matte Lemon Yellow
2. Blue: PLA Basic Cyan
3. Green: PLA Basic Christmas Green
4. Brown: PLA Basic Brown
5. Red: PLA Matte Scarlet
6. Box body & mushroom face: PLA Basic Apricot (This apricot color is very beautiful and a highlight of the whole piece)
7. White: Any white PLA will do

📏 Internal dimensions: 100mm long x 100mm wide x 130mm high

🖨️ Printing method: Default parameters have been added, supports have been added where necessary, and details such as surface print effect adjustments are included, so you can print directly (Be sure to clean the build plate thoroughly, apply glue if necessary, to avoid spaghetti)

🔧 Assembly method:

1. Box body: Simply cover it from top to bottom in order, the tolerance here is quite small, so except for the top cover, other connections may not require glue
2. Logos on all four sides: Each side has pre-drilled holes in the box body for direct insertion, the tolerance here is quite small, so a little force is required
3. Four-sided decoration: For the red and blue decorative strips in the picture, there are no pre-drilled holes here, so glue is needed