Pokemon Mega Charizard X | Mega Charizard X Pre-separated, no AMS required

🐉 Pokemon Mega Charizard X | Mega Charizard X

Introduction
The strongest starter evolution! This is the super popular character from the Pokémon series—Mega Charizard X. The model perfectly recreates its iconic black and blue color scheme, powerful muscular lines, and burning blue flame tail. Whether as a desktop decoration or a collector's display piece, it is an absolute centerpiece!

Model Features

• Dominant Appearance: Recreates the fierce posture after Mega Evolution, with visually striking blue flame effect parts on the head, wings, and tail (if printed separately).
• Rich Details: From the texture of the wings to the sharpness of the claws, every detail has been meticulously polished to capture the essence of the original.
• Easy to Print: The model has been optimized, most parts require no supports or only minimal tree supports, resulting in a high printing success rate.
• Separated Part Design (if separated parts): For multi-color printing and painting, the model is divided into parts such as the body, wings, and tail flame, ensuring easy and secure assembly.

🖨️ Recommended Print Settings

• Layer Height: 0.12mm - 0.16mm (0.12mm highly recommended for ultimate smooth dragon scales and muscle texture)
• Supports:
  • If using two-color/three-color printing: It is recommended to use tree supports with a low contact density (e.g., 10%-15%) for easy removal without damaging the surface.
  • If printing in a single color: The wings might require supports, it's recommended to print them flat.
• Filament:
  • Main Body: Matte Black PLA (best texture) or Silk Black PLA
  • Details/Flames: Cyan/Sky Blue PLA, or Silk Blue PLA (to simulate flame luster)
• Infill: 20% - 40% (Increasing infill for the base and legs is recommended for added weight and stability)

🎨 Painting/Post-processing Recommendations

• Matte Protection: After printing, it is recommended to apply a layer of matte protective clear coat, which can effectively eliminate layer lines and give the black dragon body a more textured, skin-like appearance.
• Weathering Effect: You can lightly brush some dark grey onto the black body to enhance the shadow effect on the muscles.
• Eyes: The eyes can be embellished with gold or orange to create an 'unyielding' gaze.

💡 Printing Tips

• The wings are challenging to print, it is recommended to enable “only support touching build plate”, or use a brim to prevent the wing tips from warping.
• For assembly, it is recommended to use UHU glue or 502 glue (sparingly) to ensure a secure connection for the wings.