t-shirt print - s1000rr

🎨👕 Transform a simple t-shirt into something unique with 3D printing!
This model is designed to be 3D Printed in flexible material and applied directly to fabric using heat. The result is an original, durable, and striking three-dimensional decoration that combines 3D printing technology with the world of fashion. 🖨️✨
Personalize your t-shirts, sweatshirts, and accessories simply and creatively!
🛠️ Application Instructions

1️⃣ Model Printing
Download the file and open it in Bambu Studio or your preferred slicer. Once printing is complete, carefully remove the model from the plate.
⚠️ Warning: the model is very thin (approximately 0.3 mm) and could be damaged if bent or removed abruptly.
2️⃣ Preparation
Preheat an iron and prepare a suitable surface, such as an ironing board.
3️⃣ Placement
Lay the t-shirt flat and place the model in the desired spot. Cover it with a sheet of parchment paper or other heat-resistant paper.
4️⃣ Heat Application
Press the iron onto the model for approximately 15-20 seconds, applying even pressure.
5️⃣ Cooling
Allow to cool for a few moments, then gently remove the protective paper.
✅ The model should adhere to the fabric, creating a flexible and durable 3D print.
6️⃣ Additional Fixing (recommended)
For increased durability, turn the t-shirt inside out and reapply the iron to the affected area for another 5-10 seconds.
🧼 Product Care
⚠️ To preserve the print over time, wash the garment at a maximum temperature of 50°C.
Higher temperatures could compromise the model's adhesion to the fabric and reduce its lifespan.