diagnostic scanner stand / holder (Universal)

Hey!

basically part of my ‘i will organize and neaten my entire damn box’ lineup……….

I needed a diagnostic scanner / stand / holder as my Ottofix d1max2 (Pictured) doesn't come with an installed stand like many diagnostics. 

But… then i thought its actually slightly more hassling to open the stand every time to place my Autel MS919 / Topdon  Phoenix in the cabinet each time, must easier to just plonk it down. 

Thus… here we are!

Primarily designed to fit a 10inch screened diagnostic, but it also works with the 13 inch Autel elite and the giant DrivePro by Autologic. other than the above scanners/diagnostic tools i have not tested it with any other brands, but the idea behind it was to be more ‘universal’ than anything. 

post a comment if your scanners fits so others will know please :)

i have included a 3x30mm magnet slot in the bottom or you can be cheap like me and use double sided tape.

Print profiles:

• Universal scanner holder/stand - additions walls for strength
• Optional OBD (Enlarged) holder - see pictured 
• Optional cable tie which will require some small screws. i used the screw which  i used with my Toolify3d range (ToolGrid style items) which is a 4x10mm cap head thread forming screw. - see pictured

The cable holder/tidy can go on either side either horizontally or vertically.

Material:

I printed from PETG, which i have loads of from my Toolify 3d (ToolGrid style bits) range that I'm producing. i have not tested it in any other materials.

Please comment/confirm if other materials will work (I'm pretty sure any material works!)

If any adjustments are required, please comment/message me and i will upload an additional print profile with your needs.

Happy organizing guys/gals !