Panzer VIII Maus Super Heavy Tank 1/35 Scale

If you enjoy my work, consider supporting me ❤️ ❤️ ❤️
Buy Me a Coffee: buymeacoffee.com/bavaria3 | Ko-fi: https://ko-fi.com/bavaria3

Don’t miss out — follow me for more top-quality tank models!

All models are designed from scratch in Fusion 360 and validated through real prints using my own equipment, with no AI involved. Each design is tested and refined through multiple iterations to ensure reliability and real-world usability.

If you like my work, feel free to like, save, and share your thoughts in the comments — your feedback directly helps improve future designs.

================================

📋 Recommended Print Settings (For Best Results) 

• Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly. 
• Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model. 
• Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping. 
• Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion. 

🔧 Assembly Diagram Notes 

• Blue Lines: Require super glue for assembly. I use Gorilla Super Glue. 
• Yellow Lines: These are moving parts. Do not apply glue here.

Before installing the tank’s side skirts, please first fit the front road wheels and rear road wheels.

The recommended assembly order is:

1. Install the front idler wheels and rear drive sprockets (front and rear wheels)
2. Attach the side skirts
3. Then install the remaining road wheels in the middle

================================