Single-family house with garage and PV system in H0

This single-family house is a 1:1 replica of my own house and was completely reconstructed in Tinkercad

It has the following dimensions: 120mm x 162 mm x 81 mm. Additionally, the patio roof adds another 46 mm

The patio roof is in a separate project (https://makerworld.com/de/models/2955398-patio-roof-in-h0#profileId-3311848), as it should be printed with a 0.2 nozzle (there were stringing issues with a 0.4 nozzle). The transparent roof is also in a separate file, as I have extremely optimized the settings for transparent printing. A 0.4 nozzle is required for this again

Additionally, a separate file with optimized settings for transparent printing is included here for the window glass

A printing error is still visible in the photo without the patio roof. I have since corrected this

I used the following filament:

Bambu Lab PLA Basic: Dark Gray, Black, Brown, Silver

Sunlu PLA Plus: Bone White, Marble Brick Red

Geeetech PLA: Transparent

Anycubic PLA: Bronze

It was very difficult to find filament with the original colors of the brick (Anycubic Bronze), the roof (Sunlu Marble Brick Red), and the windows (Bambu Lab Brown)

You can find more models here:
https://makerworld.com/de/@aemmighausen

I will be uploading more models (remixes) in the near future