Print Profile(7)
Description
Boost Me (for free)
Boost me, if you like my design.
Pegboards compatible with the Ikea Skadis system. These boards can be linked seamlessly. No space is wasted between the separate boards.
There are two different types of connectors. Both of them have notches on the backside for M3 hex nuts. Use M3x10 to M3x14 screws to connect the boards.
- One set of connectors does not block any holes (recommended for these boards).
- The other set of connectors blocks a few of the pegboard holes. These are somewhat easier to install and make the whole construction sturdier.
There are boards with sizes 320x320 mm, 240x240 mm and 160x160 mm boards. For the 320x320 mm boards and the 160x160 mm boards there are 3 versions (A-C) that need to be attached below each other to create a seamless pattern along the boards.
If you want to print the 240 x 240 mm boards with a P1/X1 printer, you need to change the stock settings of the printer. First, you need to click on your printer model “Click to edit preset”:
This will open the “Printer settings”. You need to delete the default values for “Bed exclude area”. Just delete the values in the red box in the picture below. Then save the profile under a new name by clicking on the small disk icon. To print the 240x240 mm boards, you have to use the printer profile you just saved.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)