86 Switch Panel Xiaomi/Mijia Smart Curtain Remote Holder Multi-color No AMS Required with Cat Decoration

This switch panel remote holder was originally a small model I made for my own use. Seeing a related competition, I decided to upload it for friends who need it. I would be very happy if it could help you.

This model was designed to solve the problem of remote control storage and to decorate the switch.

The remote control storage part has been optimized for Xiaomi/Mijia smart curtain remotes, and the size is just right. If you have other remotes of similar size at home, they should also work.

The decorative part uses Tusan Party @Tusanparty teacher's open-source cat bean board model appearance. I would like to express my gratitude here.

The model has four print profiles, with two main differences: AMS or manual color change, and whether it has a buckle.

Please choose the first point based on whether you have an AMS.

• If you have an AMS, please choose the AMS version;
• If you do not have an AMS, please choose the manual color change version. The printer will pause when a color change is needed (the pause point will occur a few minutes after printing begins), at which time manual filament loading and unloading is required. This model has been optimized, and only one filament change is needed, which is not troublesome. To achieve the effect shown in the cover image, you should first load white filament, then switch to grey filament.

Please choose the second point based on the type of switch.

• The switch in the cover image is a wireless switch, which is attached to the desired position with adhesive on the back, leaving a gap on the back. If your switch is also this type of wireless switch, you can choose the version with a buckle, which can be securely fixed without extra means like glue.
• If your switch is a wall switch, there is usually no gap on the back. In this case, please choose the version without a buckle. For some switches, it can also naturally clip on, but it is not very firm; for other switches, some glue may be needed to assist in fixing to ensure firmness.

The structure of the model at the remote control storage area requires support. I have drawn the corresponding supports myself, please do not manually enable the slicing function within the software. After printing, you only need to remove the excess structure in the corresponding position.

Since this is a model for personal use, there might be some issues I haven't discovered. Feel free to communicate with me in the comments section.