30g Anti-Tangle Long-Cast Floating Casting Aid
Print Profile(1)
Description
It's a very simple 30g floating casting aid. Besides printing filament, you only need an additional 15cm length of 2mm inner/4mm outer diameter PTFE tube—the same type used in your printer. Simply insert it, add two drops of 502 glue, and it's done. This will give you casting aid freedom. You can adjust the weight by changing the infill density; exceeding 50 might turn it into a sinking casting aid. I primarily use this for sea fishing with a long rod. With a 3-meter Abu MH spinning rod and #1 PE line, it can cast over 100 meters. The 10.5mm large hole at the front can accommodate a Texas rig stopper bead and a swivel snap, thus eliminating tangles caused by snaps.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)