Das Filament Refill Spool NFC-Tag 215 Snapmaker U1

Custom spool for Filament refill rolls with interchangeable NFC-Tag 215!

I print a lot with refill spools – cheaper, less waste, simply better.

However, two problems bothered me: The Snapmaker U1 does not recognize refill rolls without an NFC tag, and with the original spools, the two halves often came apart unintentionally for me.

This spool solves both.

The two halves are secured by a spring lock – which holds reliably together and can still be opened without tools.

The NFC-Tag 215 is clipped into its own holder and locks securely into place, thus preventing unintentional release.

Exchanging it is still possible at any time – e g if you have programmed a different tag for a different Filament.

Special feature: The tags are printed directly into the included sample print – this gives you a test print per material and the tag sits securely in the recess.

Required / tested with:

– Snapmaker U1 with SnapmakerU1-Extended-Firmware v1.3.0-paxx12-17

– NFC-Tag 215 Firmware: https://github.com/paxx12-snapmaker-u1/SnapmakerU1-Extended-Firmware

I look forward to photos of your prints! 🙌