BJD Anime style 16mm 18mm large iris small iris water slide decal eyeball base
Print Profile(1)
Description
Printing will be a bit rough, and stickers won't stick well. Just brush on a layer of nail top coat and cure it with a light, then apply the water slide decal. After drying, cover it with a clear dome, and it will be very shiny. It's zero difficulty and prints very fast. You can apply one batch, let it print, and then move on to the next batch. I used a 0.4 nozzle with default parameters; a 0.2 nozzle should be even better.
After sealing, if you look closely, you can still see the layer lines, but they are not obvious to the eye. Also, if too much glue is applied to the top layer gaps, bubbles can easily form, so be careful to smooth them out yourself.
However, I don't have such a large and relatively flat clear dome mold on hand. I need to look for one or make one myself.
The pattern used is a Bodhisattva eye motif.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)