Jammie Dodger Magnet Fidget
Print Profile(1)
Description
A Nice Jammie Dodger Magnet Fidget to play with!
Made in Blender by yours truly :D
5cm wide, 5cm long, 1cm tall
Boost Me (for free)
Feel free to Boost me! :D
MAGNET INFO
By Default, this model comes with 8 5x2mm Magnet Holes.
If you want to Change it to fit your Magnets do as follows! The bigger the Magnet, the stronger the force!
- Open this Model in Bambu Studio
- Go to the Objects Tab
- Click on the 5x2 ones
- Go to Scale at the top (Make sure uniform scale is off so you can change the height separately!)
- Change it so your size of Magnets whilst keeping the 0.1mm at the end for a nice press fit!
- (Repeat for the other 7 Magnets in this model)
This Model comes with a Pause so you can put your Magnets in, so Make Sure you remember the orientation of the Magnets!
An Easy way to do this is to get your 8 Magnets, split them in half and when the Print pauses, place the 4 Magnets in all the same orientation, then once the first half is done and your printing the other half, place the remaining Magnets on the finished half so you know which way they attract to place them on the Print!
Nice and easy Print :D
And Thank you for Printing this Model!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)