Minimalist Universal Soap Dispenser Mount

Bring clean, Scandinavian minimalism to your bathroom or kitchen with this Minimalist Universal Soap Dispenser Wall Mount.

Unlike traditional holders that wrap around the entire bottle, this floating design holds the bottle securely by the neck. This makes it truly universal—it fits round, square, large, or small bottles (like Rituals, Aesop, and standard amber glass bottles) as its parametric its easy to adjust to your bottle.

Designed with a completely flat backplate, it is optimized for no-drill installation using heavy-duty double-sided mounting tape (like 3M VHB) or adhesive, making it perfect for tiles and rentals.

✨ Key Features

• Universal Fit: Fits any bottle shape/size with a standard 27 mm neck (adjustable).
• No-Drill / Damage-Free: Large backplate surface area area ensures maximum adhesion for mounting tape or glue (adjustible).
• Engineered for Strength: Features a smooth inner fillet (curve) that elegantly distributes the downward force when pressing the pump, preventing the plastic from snapping.
• Clean Aesthetics: Zero visible screws or bulky brackets.

🖨️ Recommended Print Settings

For maximum structural strength to handle daily pumping, please follow these orientation and slicer guidelines:

• Print Orientation: CRUCIAL: Lay the model flat on its SIDE on the print bed. Do not print it standing up like an "L". Printing on its side ensures continuous layer lines around the curve, making it virtually unbreakable.
• Material: PETG
• Wall Loops / Perimeters: 5 - 6 walls
• Infill: 25% Gyroid
• Supports: Minimal supports needed under the overhanging curved area when printed on its side.

🔧 Installation Tips

1. Clean both your wall tile and the printed backplate with isopropyl alcohol to remove grease.
2. Apply a high-quality double-sided acrylic foam tape (e.g., 3M VHB) covering the backplate.
3. Press firmly against the wall and let the adhesive cure for 24 hours before hanging a full soap bottle.
4. To mount, simply unscrew your soap pump, slide the bottle neck into the holder from below, and screw the pump back on from the top.