COROHA

cover

IMG_2656.jpg

IMG_2649.jpg

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h4>🇯🇵 日本語説明 (Japanese)</h4>【概要】 日本の伝統的な建築「三重塔（さんじゅうのとう）」をモチーフにした、デスク用のメカニカルスイッチ・クリッカー（フィジェットトイ）です。 最上部の屋根を押すことで、中に仕込んだスイッチがカチカチと心地よいクリック感を刻みます。 さらに、モジュール式（組み立て式）の設計になっているため、ユーザーの好みに合わせて「一重の塔（平屋構造）」「二重の塔」「三重の塔」へと自由に高さを変更・カスタマイズが可能です。※注意：中に仕込むメカニカルキーボード用のキースイッチ（MX互換スイッチ等）は付属しません。各自でご用意の上、組み立ててください。【特徴】<ul><li>自由なカスタマイズ: パーツの組み合わせで一重〜三重の塔へ変形可能。</li><li>心地よいクリック感: デスクワークの合間の気分転換や、フィジェットトイとして最適。</li><li>美しい色分け: 赤、黒、白、金（相輪部分）のフィラメントを使い分けることで、塗装なしでもリアルな伝統美を再現。</li></ul>【推奨プリント設定】<ul><li>素材: PLA（赤、黒、白、ゴールド等）</li><li>積層ピッチ: 0.16mm 〜 0.20mm</li><li>インフィル: 15% 程度</li><li>サポート: 基本的に不要ですが、各パーツの噛み合わせ部分や、屋根の裏側のブリッジが綺麗に出ない場合は、必要に応じて部分的なサポートを検討してください。</li></ul><h4>🇺🇸 英語説明 (English)</h4>[Overview] This is a desktop mechanical switch clicker (fidget toy) styled after a traditional Japanese Triple-Story Pagoda (&#34;Sanju-no-to&#34;). Pressing down on the top roof gives you a satisfying, tactile click from the key switch embedded inside. Thanks to its modular design, you can easily stack and customize it into a Single-story, Double-story, or the full Triple-story pagoda depending on your preference.Note: The mechanical keyboard switch (MX-compatible switch) is NOT included. Please prepare your own switch for assembly.[Features]<ul><li>Modular Customization: Can be reconfigured into a 1-tier, 2-tier, or 3-tier pagoda by swapping the parts.</li><li>Satisfying Fidget Toy: Perfect for clicking away to relieve stress or keep your hands busy during work.</li><li>Beautiful Multi-Color Look: By using Red, Black, White, and Gold filaments, you can achieve a realistic traditional look without any painting.</li></ul>[Recommended Print Settings]<ul><li>Material: PLA (Red, Black, White, Gold, etc.)</li><li>Layer Height: 0.16mm - 0.20mm</li><li>Infill: ~15%</li><li>Supports: Generally not required. However, if the interlocking joints or under-roof bridges do not print cleanly on your machine, consider adding localized supports.</li></ul>

<h4>🇯🇵 Japanese Description (Japanese)</h4>[Overview] This is a desktop mechanical switch clicker (fidget toy) inspired by the traditional Japanese architecture &#34;Sanju-no-to&#34; (Triple-Story Pagoda). Pressing the top roof produces a satisfying click from the switch installed inside. Furthermore, its modular (assembly-type) design allows users to freely change and customize its height to a &#34;single-story pagoda (flat structure)&#34;, &#34;double-story pagoda&#34;, or &#34;triple-story pagoda&#34; according to their preference.Note: Mechanical keyboard key switches (MX-compatible switches, etc.) to be installed inside are not included. Please prepare your own and assemble.[Features]<ul><li>Free Customization: Can be transformed into a single- to triple-story pagoda by combining parts.</li><li>Comfortable Click Feel: Ideal for a change of pace during desk work or as a fidget toy.</li><li>Beautiful Color Separation: By using red, black, white, and gold (sōrin part) filaments, realistic traditional beauty can be reproduced without painting.</li></ul>[Recommended Print Settings]<ul><li>Material: PLA (red, black, white, gold, etc.)</li><li>Layer Height: 0.16mm ~ 0.20mm</li><li>Infill: Approximately 15%</li><li>Supports: Generally not required, but if the interlocking parts or the bridge on the underside of the roof do not print cleanly, consider partial supports as needed.</li></ul><h4>🇺🇸 英語説明 (English)</h4>[Overview] This is a desktop mechanical switch clicker (fidget toy) styled after a traditional Japanese Triple-Story Pagoda (&#34;Sanju-no-to&#34;). Pressing down on the top roof gives you a satisfying, tactile click from the key switch embedded inside. Thanks to its modular design, you can easily stack and customize it into a Single-story, Double-story, or the full Triple-story pagoda depending on your preference.Note: The mechanical keyboard switch (MX-compatible switch) is NOT included. Please prepare your own switch for assembly.[Features]<ul><li>Modular Customization: Can be reconfigured into a 1-tier, 2-tier, or 3-tier pagoda by swapping the parts.</li><li>Satisfying Fidget Toy: Perfect for clicking away to relieve stress or keep your hands busy during work.</li><li>Beautiful Multi-Color Look: By using Red, Black, White, and Gold filaments, you can achieve a realistic traditional look without any painting.</li></ul>[Recommended Print Settings]<ul><li>Material: PLA (Red, Black, White, Gold, etc.)</li><li>Layer Height: 0.16mm - 0.20mm</li><li>Infill: ~15%</li><li>Supports: Generally not required. However, if the interlocking joints or under-roof bridges do not print cleanly on your machine, consider adding localized supports.</li></ul>

Print Profile(0)

Description

🇯🇵 Japanese Description (Japanese)

🇺🇸 英語説明 (English)

Comment & Rating (0)

License

Related Models