Expeditions Tracked Vehicle 1/10
Print Profile(9)
Description
An (almost) completely printed 1/10 scale tracked vehicle
ATTENTION: Currently still in BETA stage!
- Lighting is still missing
- Permanently installed remote control (with 2-channel mixer) is unfortunately still missing. However, a test drive has already been carried out!
YouTube: https://www.youtube.com/watch?v=VRrMu5q9drg
But I don't want to withhold it from anyone ;-)
I am offering an almost self-designed tracked vehicle for self-printing here. Caution, it is very large (420mm wide, 620mm long)!
I used the track links, as well as the gearbox from @browser. However, my own reinforced gearbox is under development and will also be offered here soon.
The vehicle is powered by two 540 brushed electric motors (80T), and the gear reduction is implemented using a 6mm toothed belt. For the suspension, I used four shock absorbers from RC accessories.
I have assigned the print profiles to themes and stored them individually.
Bill of Materials :
- 4x Ball bearings 8x16x5 (Idler wheels)
- 2x Nut M8 DIN 6924 (Idler wheels)
- 6x Hex socket head cap screw ISO 4762 M5x20 (Idler wheels)
- 6x Hexagon nut DIN 6924 M5 (Idler wheels)
- 16x Ball bearings 5x16x5 625 (Road wheels)
- 8x Hex socket button head screw ISO 7380-2 M4 x 40 (Road wheels)
- 12x Hex socket head cap screw ISO 4762 M5 x 20 (Road wheels)
- 4x Hex socket head cap screw ISO 4762 M8 x 50 (Road wheels)
- 4x Nut M8 DIN 6924 (Road wheels)
- 8x Hex socket head cap screw ISO 4762 M4 x 16 (Road wheels)
- 8x Threaded insert M4 (Road wheels)
- 8x Threaded insert M5 (Road wheels)
- 4x Shock absorbers 85mm (Road wheels)
- 12x Nut M5 DIN 6924 (Road wheels)
- 2x Hex socket button head screw ISO 7380-2 M5 x 50 (Upper track roller = Carrier roller)
- 4x Ball bearings 5x16x5 625 (Upper track roller)
- 8x Nut M5 DIN 6924 (Upper track roller)
- 8x Hex socket head cap screw ISO 4762 M5 x 20 (Upper track roller)
- 10x Hex socket head cap screw ISO 4762 M4 x 60 (Drive sprocket)
- 10x Nut M4 DIN 6924 (Drive sprocket)
- 2x Nut M10 DIN 6924 (Drive sprocket)
- 4x Ball bearings 10x19x5 625 (Drive sprocket)
- 2x Circlips 10mm (Drive sprocket)
- 2x Shaft 10mm ALU or Brass 176mm (Drive sprocket)
- 6x Hex socket head cap screw ISO 4762 M4 x 25 (Drive sprocket gearbox)
- 6x Hex socket head cap screw ISO 4762 M4 x 30 (Gearbox)
- 2x Grub screw ISO 4029 M5x10 (Drive sprocket)
- 8x Ball bearings 5x11x4 (Gearbox)
- 10x Ball bearings 10x15x4 (Gearbox)
- 6x Belt, Transmission 200-2GT-6 100 Teeth (Gearbox)
- 2x Belt, Transmission 350-2GT (Gearbox)
- 2x Shaft 5mm x60mm Brass (Gearbox)
- 2x Hex socket head cap screw ISO 4762 M3 x 16 (Gearbox)
- 2x Hex wheel hub 12mm * 18mm (E-Motor Pinion)
- 24x Hex socket countersunk screw 4*16mm (Bottom shell)
- 24x Hexagon nut 4mm (Bottom shell)
- 216x Lens head screw M3 x 45mm (Tracks, 2x per track link)
- and various washers where it makes sense
- 6x 5mm LED (2* White, 2x Yellow, 2x Red) (Lighting)
- 4x 10mm LED (Lighting)
- 2x 540 brushed motor (Drive)
- 2x Speed controller (Drive)
- 2x Battery (Drive)
- 1x Receiver (Drive)
- 1x Transmitter (ATTENTION! Must be able to cross-mix 2 channels!) (Drive)
(no guarantee of completeness)
Documentation (3)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)