Pink Brigadeiro Ejector
Print Profile(1)
Description
⚙️ Recommended print settings
Nozzle: 0.4 mm
Layer height: 0.20 mm (0.16 mm for finer finish)
Material: PLA
No supports needed
No brim or raft needed
Infill: 10 to 15%
Walls: 3 perimeters
Top/Bottom: 4 layers
Speed: standard for PLA
Orientation: print exactly in the file's position
Cooling: 100% after initial layers
🍬 Usage
Ejector developed for shaping brigadeiros and other soft sweets
After shaping the brigadeiro, press the ejector onto the sweet and use the ejection mechanism to easily demold it
⚠️ Notes
Model intended for PLA printing
Wash only with cold or lukewarm water and neutral detergent
Do not use hot water
Do not microwave or put in dishwasher
Do not expose to heat, as PLA can deform
Recommended for use only with food protected by plastic wrap or for brief contact with food, according to user preference
⭐ If this model was useful to you, please consider leaving a review and posting a photo of your print. This greatly helps my work! 😊
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)