Pokemon - Ash-Greninja 18cm disassembled no AMS required

🥷 Pokemon - Ash-Greninja 3D Printed Model

He is the "Bond Phenomenon" who shares a deep connection with Ash in Pokémon XY —Ash-Greninja! This ninja Pokemon, with a deep blue body, red head markings, and a giant Water Shuriken floating on its back, the model stands approximately 18cm tall, full-bodied and rich in detail. The model has been pre-disassembled for you, so no AMS (Automatic Material System) required to easily print multi-color effects. It's perfect for beginners and as a surprise gift for children or Pokemon fans!🎁

✨ Model Highlights

• No AMS printing required: Designed for regular single-color printers! The model has been disassembled into parts such as the head, body, limbs, Water Shuriken, and scarf. You can use different colored filaments like dark blue, red, and white to print each part, then assemble them to perfectly recreate the classic animated look.
• Super Large Size: The finished height is approximately 18cm, much larger than typical blind box figures, very eye-catching on a desk and has a good feel in hand.
• Rich Details: Perfectly replicates Ash-Greninja's red head markings, Water Shuriken, scarf, and large eyes, making it both cute and cool.

🛠️ Recommended Print Settings

• filament: Recommended to use PLA (Matte PLA works better and is easier to sand)
• Layer Height: 0.2mm (Balances speed and quality)
• Infill: 15% - 20% (Ensures strength)
• Supports: Supports must be enabled (especially for overhangs like the Water Shuriken and scarf)
• Print Speed: Standard speed is sufficient

📝 Assembly Tips
Since the model is disassembled, please use model glue for assembly after printing. If there are layer lines, it is recommended to sand lightly and then paint for a more perfect finish!