Anime-style hairstyle — Cardcaptor Sakura (live-action appearance, Cardcaptor Sakura, super lightweight)
Print Profile(2)
Description
Configuration Statement: The initial configuration is made according to a friend's head circumference of 58cm (ellipse major axis 185mm, around 170mm), can be used directly for head circumferences below 58cm
Thanks to blogger +7 beauty for the sample images
Douyin link included, fellow enthusiasts please like https://v.douyin.com/0SPeOr1-PWA
Warm reminder: This model has undergone multiple adjustments and is very easy to print. It is also in its lightest state while ensuring strength. Please do not modify my configuration after downloading. Currently, after embedding the magnets, the total weight is 589g, which is the lightest possible. It will not be damaged by serious bumps. Unless you want to increase the thickness or strength, please do not modify the configuration, please do not modify the configuration, please do not modify the configuration!!!
Cardcaptor Sakura Hairstyle Assembly Method:
1. You need to prepare 50 magnets with a diameter of 8mm and a thickness of 4mm (The left and right halves of the main body can be fixed with glue instead of magnetic attraction, which will be stronger and save 18 magnets)
2. Install the magnets. If they are very tight during installation, it is recommended to use a blowtorch (not a lighter) to heat them. Basically, ignite it, then immediately release and then immediately embed the magnet. If the magnet is loose during installation, you can use hot glue or super glue (for hot glue, a temperature below 80 degrees Celsius is recommended, or you can use a fan to dissipate heat when applying the hot glue. A small amount of high-temperature hot glue applied and installed will not demagnetize the magnets)
Note: Do not get the magnetic attraction direction wrong
3. If you feel the magnetic attraction is unstable, the left and right halves can also be secured with glue
There is no specific color recommendation, I used PLA Desert Brown and PLA Red here
Currently, the magnetic attraction only has the initial configuration. If you want a scaled-down or enlarged configuration, please leave a comment in the comments section
Boost Me (for free)
You've read this far, giving me a boost isn't too much to ask, right
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)