Laminate Cutter with Box
Print Profile(1)
Description
Laminate Cutter and Hinged Box
The Cutter (Handle): A rigid and ergonomic handle designed to accommodate a robust laminate cutting blade. The blade is securely fastened with two M3 screws and their respective washers. The lid features the engraved text "Taglierino Formica" for immediate identification in the workshop.
The Box: A robust and compact container equipped with an integrated print-in-place hinge. The internal space is precisely toleranced to the millimeter to secure the cutter with the blade, preventing movement and protecting the blade's edge.
Snap Closure: A practical front clip ensures the box remains securely closed during transport or inside a toolbox.
Recommended Print Settings
Filament: PLA: Suitable for light or non-intensive hobby use.
Layer Height:
** 0.20 mm (or 0.16 mm for even sharper text and perfect hinge tolerances).
Walls: 4 or 6 walls (essential for providing structural rigidity to the cutter handle).
Infill: 30-35% (Gyroid or Grid type recommended for maximum strength).
Supports: Only at the hinge points.
Blade purchased from:
https://it.aliexpress.com/item/1005008298112648.html?spm=a2g0o.order_list.order_list_main.40.6b2c3696f5JZPb&gatewayAdapt=glo2ita
To complete the assembly as shown in the project photos, you will need:
- 2 M3 pan head screws
- 2 M3 flat washers
- 1 blade for cutting or engraving laminate
For the inside of the hinges, I used part of a rivet and glued it on one side.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)