3-story apartment building in H0

This apartment building is a remix by Pietia, which can be found at the following link: https://www.thingiverse.com/thing:4886039

I modified the house in several parts and also had to redesign some things

Changes I made

• the original model is in 1:56, so everything was adapted to 1:87 (H0)
• all windows were revised or redesigned and adapted for two-color printing (an AMS is not absolutely necessary)
• there are separate window sills for all windows
• I completely separated the front so that the entrance door, the canopy, and the window elements can be printed separately
• I removed the intended apartment
• I designed the roof straight and replaced the chimneys with a modern ventilation system

• there is an extra print file for the window panes

   

Notes:

• everything was printed with a 0.4 nozzle
• for the glass blocks I recommend a 0.2 nozzle
• basically everything can be adjusted in size via the slicer
• some parts are also interchangeable and mirroring the walls creates new variants of the house

• the size of the house is approximately 11.5 cm x 8.5 cm x 9.5 cm (W/D/H)

   

More models can be found here:
https://makerworld.com/de/@aemmighausen

I will upload more models (remixes) in the near future