Woodcut style~Miniature landscape

Woodcut Style Miniature Landscape

• Two ways to play

  • 1 Four Seasons Tree Compendium
  • 2 Combined Forest Scene

  Don't hesitate, friend, quickly print yourself a small miniature forest landscape

• Gradient Principle

  You only need the single-color filament you have on hand, no gradient filament is required, and there's no need for repeated purging between every layer ╮(╯_╰)╭

  Using slicing software, by disabling AMS purging during material changes and setting thin walls for single layers, a quasi-linear transition between two adjacent filament colors is achieved

• Printing Time

  Approximately 38-45 minutes, printing time varies based on different color proportion ratios

• Materials

  Summer: Print with three to four colors of PLA material; if printing the version with a small pond, the pond on the second plate requires a fifth color

  Recommended colors: Flesh/Khaki, Camouflage Dark Green, Matcha Green, Malt Green

• Important Notes

  

  ↑ Do not adjust the purge volume of the filament, otherwise the color gradient effect will be lost

   

  

  ↑ Try to print the leaves using similar colors, otherwise the gradient effect will not be ideal

   

  

  ↑ Cannot confirm if A series machines can be used for printing (I do not have an A series machine to verify TAT)

• Other

  • The configuration file includes two models: one with a pond card slot and one without
  • Other print profiles for this scene will be uploaded gradually