WavePaw Personalized Pet Bowl Holder

Meet WavePaw, a modern personalized pet bowl holder designed to look clean, fun, and premium in any home.

This model was created with a soft rounded shape, side handle cutouts, a smooth wave-style color transition, and raised personalized name text on the front. It is designed to be printed as one solid piece, while still allowing beautiful two-color styling using AMS, filament painting, or manual color changes in your slicer.

The design works great for pets because it has a stable wide base, an elevated bowl position, and a removable stainless steel insert bowl. The side openings make it easier to grab, move, and clean.

This is perfect for anyone who wants a cute, modern, and customizable bowl setup for their dog or cat.

Stainless Steel Bowl Suggestion: https://a.co/d/0i83I8gs (Amazon)

Features

Personalized raised name on the front
Modern wave design around the body
Rounded-square premium shape
Side handle cutouts
Designed for two-color printing
Works with matte PLA for a soft commercial look
Stable elevated base
Great for dogs or cats
Clean product-style design for home decor

Personalization

You can customize the front name with your pet’s name.

Recommended text style:

Font: Nunito Sans SemiBold or similar rounded geometric sans-serif
Text style: Uppercase
Letter height: around 20 mm
Raised text depth: around 1.2 mm
Letter spacing: around 4.5 mm
Placement: centered between the two side handles, above the wave line

Good example names:

ZOE
MILO
LUNA
BELLA
COCO
MAX
NALA
LOLA

Recommended Color Combos

These combinations were designed with matte PLA in mind:

Coral Pop
Top: Matte Coral / Orange-Red
Base: Matte White / Ivory
Text: Matte White / Ivory

Mint Fresh
Top: Matte Mint / Aqua Green
Base: Matte White / Ivory
Text: Matte White / Ivory

Lavender Cute
Top: Matte Lavender / Purple
Base: Matte White / Ivory
Text: Matte White / Ivory

For the best result, use matte PLA. The matte finish makes the bowl look more premium and reduces the plastic shine.

Print Notes

This model is intended as a decorative and functional bowl holder.
Use a removable stainless steel bowl insert for food or water.
Do not serve food directly on the printed plastic surface.
For pet use, make sure the print is clean, smooth, and free of sharp edges.

Recommended material:

PLA Matte
PLA+
PETG, if you want more durability and easier washing

Suggested Print Settings

Layer height: 0.16 mm or 0.20 mm
Wall loops: 3–4
Infill: 15–25%
Top/bottom layers: 5 or more
Supports: only if your slicer requires them for the handle openings
Brim: optional, useful for extra bed adhesion
Filament: Matte PLA recommended

For a premium finish, print slowly enough to keep the curves smooth and the lettering clean.