T-34 magnet

Ladies and gentlemen, I present to you the T-34/85 magnet: a model designed for the **T-34 Evolution Remix!** contest **Model remixed based on** T-34 Tank Magnetic Modular Platform 1/35 Scale t34 - Free 3D Printed Model - MakerWorld This model is a scaled-down WWII T-34, re-envisioned as a charming magnet/desk model. This T-34 is completely printable without AMS and without using glue, which makes it very easy to print, also due to its very low filament cost in grams. It only requires magnets that will perfectly snap into place: magnet sizes available in the model are currently 10mm*x*3mm and 6mm*x*2mm (if you need other sizes, write a comment!) Assembly Instructions: Once you have printed the tracks (plate 1), the main body with the desired magnet sizes (plate 5 = 10mm*x*3mm/ plate 6 = 6mm*x*2mm), and the turret (plate 4), all that remains is to assemble:

• Step 1 = attach the tracks to the main body using the dedicated interlocking parts
• Step 2 = insert the turret into the main body through the hole, which ensures 360-degree mobility!
• Step 3 = snap the magnets of the chosen sizes into the bottom of the T-34, no glue needed!

Sandbags (optional and decorative): once the sandbags are printed with holes for the user-chosen magnet sizes (plate 2 = 10mm*x*3mm/ plate 3 = 6mm*x*2mm), snap the correct size magnets underneath the sandbags, no glue needed! Recommended print colors: for the turret and body, olive green/military green is recommended, for the tracks, gray is recommended, while for the sandbags (optional), gray/dark yellow/light brown is recommended Fully printable on A1 mini and all other printers! The model is designed for PLA Basic If you liked it, please support me with a like and a boost me !! <3