Begonie Maculata aka Polka Dot

# 🌿 Begonia Maculata aka Polka Dot Self-Watering Pot Set – S, M, L & XL

This set was specifically designed so that the pots **do not need to be scaled**

Anyone who has ever scaled decorative plant pots with intricate leaf motifs knows the problem: wall thicknesses change, details become messy, and the design loses its effect. That's why you get four separately adjusted sizes here, each specifically optimized for its size

Each pot features a plastically elaborated **Polka Dot leaf** which stands out particularly well with single-color prints and gives the pots their characteristic look

---

# 💧 Self-Watering System

All sizes are designed for use as self-watering pots

The actual plant pot sits in the upper section. Below it is a separate water reservoir

A capillary wick, guided through the bottom openings of the orchid or aroid pot, allows the plant to independently draw water from the reservoir. This ensures a consistent water supply and significantly extends watering intervals

For all sizes, care has been taken to ensure that the inner pots can be easily removed from above without having to manipulate them inside the pot

---

# 👀 Viewing Window (optional)

On the back, there is a viewing window through which water level and root development can be easily monitored without having to remove the inner pot

The viewing window is designed as an optional negative and can be activated or deactivated in Bambu Studio as needed

With Viewing Window

✅ Water level control

✅ Root development control

✅ Ideal for orchids, alocasias, and other aroid plants

Without Viewing Window

✅ Closed outer wall

✅ Use as decoration

✅ Use as a vase

✅ Use as a pen holder

✅ Use as a general storage container

---

# 📏 Sizes

Size S

* Suitable for a clear orchid pot with **6 cm diameter**

* Water reservoir: **100 ml plastic cup**

* Capillary wick can be easily guided through the orchid pot

* Easy insertion and removal of the inner pot

---

Size M

* Suitable for a clear orchid pot with **7.6 cm diameter**

* Water reservoir: **200 ml plastic cup**

* Capillary wick can be easily guided through the orchid pot

* Easy insertion and removal of the inner pot

---

Size L

* Suitable for a clear orchid pot with **9 cm diameter**

* Water reservoir: **400 ml plastic cup**

* Ideal for larger plants with higher water requirements

---

Size XL

* Suitable for a **10 cm aroid pot**

* The aroid pot is deeper and intentionally extends slightly beyond the top edge

* This makes removing the inner pot particularly convenient

* Water reservoir: **500 ml plastic cup**

* Capillary wick can be easily guided through the aroid pot

For example:

Cups:

https://amzn.eu/d/01GtIsBM

https://www.variegata.de/produkt/toepfchen-der-toepfe/

AROID POTS 

https://www.sybotanica.com/de-de/products/dursichtiger-plfanzentopf

 S and M 

9 cm Clear Orchid Pot 

https://www.obi.de/p/2807519/

---

# ⚠️ Important Note

The print files contain only the decorative outer pots

The following components are **not part of the STL files**:

* Orchid pots

* Aroid pots

* Plastic cups for the water reservoirs

* Capillary wick

These components must be acquired separately

The required orchid pots, aroid pots, plastic cups, and capillary wicks are readily available from the big A

The outer pots serve as a decorative casing and transform simple planters into a visually appealing self-watering system

---

# 🖨️ Print Instructions

* No scaling required

* Each size has been separately adjusted

* Optimized wall thicknesses for each size

* Optimized leaf details for each size

* Suitable for PLA, PLA+, PETG, and comparable materials

* For optimal results, a fine layer height is recommended

---

# 📜 License

These files are fundamentally intended exclusively for private use

Not permitted are:

❌ Sale of digital files

❌ Distribution of digital files

❌ Dissemination of files on other platforms

❌ Sale of printed copies

❌ Commercial use of any kind

By downloading, you agree to these terms

# 📜 License

A commercial license can be acquired through MakerWorld as part of a commercial membership

# 📜 License

---

All product images are personally photographed by me at home on the dining table and are not AI-generated renderings

I show the printed models as they actually come out of the printer – without artificial enhancements or unrealistic representations

Each file is personally test-printed by me in all offered sizes before publication to ensure accuracy of fit, printability, and the best possible result. This way, you can download the models with confidence and print them directly

---

# ❤️ Support

If you like my models, I would be very happy about a like, a make, or a photo of your print

It is especially nice to see which plants have found a new home in the pots

If you share your prints on social media, I would be thrilled about a tag:

📸 **Instagram: @marbledjungle**

🎵 **TikTok: @marbledjungle**

Thank you very much for your support and happy printing! 🌿