Flight Suit on Glacio from Astroneer
Print Profile(1)
Bill of Materials
- Neodymium cylindrical magnets 10 mm x 3 mm x 14: You can find them on ecommerce sites in 20 - 50 pc. bundles and then glue them into place. Make sure all magnets are inserted with consistent orientation (North/South alignment as designed). If polarity is reversed between parts, components may repel instead of attracting. Take care to keep a uniform magnet direction during assembly.
Description
This is a 3D printable sci-fi astronaut action figure inspired by space exploration game aesthetics. The model features a stylized character standing on a fictional icy planet base (Glacio-inspired environment), designed as part of a collectible display series.
The model is fully multicolor 3D printed using PLA (orange, black, white, gold, blue, gray, and light blue), optimized for high detail and visual quality. It is ideal for desk display, shelf decoration, or collectible setups.
Dimensions
- Height: 160 mm
- Width: 100 mm
- Depth: 90 mm
- Approximate weight: ~100 g
Model Structure
The figure is composed of 3 modular parts:
- Astronaut body
- Backpack unit
- Planet surface base
All parts are designed for precise alignment and easy assembly.
Magnets & Assembly (UPDATED)
The model uses 14 neodymium cylindrical magnets (10 mm diameter × 3 mm height) for secure and clean assembly between components.
Magnets are designed to be press-fit into the dedicated cavities.
Important: polarity alignment is required
Make sure all magnets are inserted with consistent orientation (North/South alignment as designed). If polarity is reversed between parts, components may repel instead of attracting. Take care to keep a uniform magnet direction during assembly.
Alternative assembly method:
If magnets are not available, the parts can be permanently assembled using cyanoacrylate glue (super glue) or epoxy adhesive.
Print Settings (Recommended)
- Printer: Bambu Lab X1C
- Nozzle: 0.4 mm
- Layer height: 0.2 mm
Infill: 7% - 12% (low infill to take less time)
- Supports: required
- Support gap: 0.24 mm
- Material: PLA Basic - PLA Silk recommended (PLA+ also suitable)
The included 3MF file is optimized for AMS multicolor printing and for the Bambu Lab X1C printer.
Colors
Designed for multicolor printing with AMS system. Colors are pre-assigned in the provided 3MF profile for optimal visual separation and detail enhancement.
Note
This model is part of a larger collectible sci-fi planet series designed for modular display and expansion across multiple environments.
Boost Me (for free)
Thank you so much for the boost!
I really appreciate the support — it means a lot and helps my project grow.
If you print it, I’d love to see your result!
Disclaimer
This is an original fan-made creation inspired by space exploration game aesthetics. It is not affiliated with, endorsed by, or connected to any official game studio or intellectual property owner.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)