3-Headed Dragon Mythic Bust Statue

For any commercial license or support, my Patreon is available here : Patreon or Makerworld membership

THE MODEL :

Unleash the legendary power of ancient fantasy lore into your space with this magnificent three-dimensional three-headed dragon bust sculpture. Evoking the fierce and commanding silhouette of the mythic Hydra or primeval dragon lords, this unique design features three interconnected reptilian entities, each adorned with swept-back horns and highly detailed, layered neck scales. Flanked by impressive semi-extended webbed wings, the multi-headed beast rests upon an elaborate hexagonal pedestal covered in intricate runic carvings and geometric occult star crests. It is the ultimate statement masterpiece to anchor a Dark Academia study, elevate a tabletop gaming workspace, or complement raw crystal clusters and vintage leather books.

Tested Print Settings (Recommendations): The crisp definition of the scale patterns, the sharp horn tips, and the complex lines of the runic base were successfully verified (the detailed physical preview is featured in the file Gemini_Generated_Image_fa8jgvfa8jgvfa8j.png).

• Infill: Set between 10% to 15% (gyroid pattern suggested). Because this model features significant lateral overhangs from the side heads and the wings, a slightly higher infill rate than average ensures perfect structural stability during the manufacturing process.
• Nozzle: 0.4 mm
• Supports: Tailored tree supports are highly required beneath all three overhanging jawlines, under the main horn structures, and below the lowest curved arches of the wings.

Sizing Information: The model is scaled to balanced tabletop dimensions, offering a striking display presence without overcrowding your shelf layout. Please feel free to freely resize the model inside your slicing software to upscale it into a commanding room centerpiece or downscale it into a legendary custom board game artifact.

INFORMATION:

A common question is: why do these prints require supports when they could be printed lying flat?

For my designs, I deliberately choose to print them standing upright rather than flat, in order to achieve the best possible level of detail. I prioritize visual quality over saving a few grams of filament.

Of course, you are free to change the print orientation in your slicer if you prefer.

FILES :

All models are available for download in 3MF format. We recommend using Bambu Studio (Bambu Lab's slicer), as some specific modifications may only be visible within this software.